On November 28, 2025, Technobud Group, namely its flagship company — LLC Klesiv Aggregates Quarry “Technobud“ (KKNK “Technobud“), became one of the first crushed stone producers in Ukraine to obtain the Certificate of Conformity of Factory Production Control (FPC) in accordance with the requirements of the Law of Ukraine “On the Provision of Construction Products on the Market” and the implemented EU Regulation No. 305/2011.
The document was issued by the designated conformity assessment body LLC “Ukrcertification” and confirms that the products of KKNK “Technobud“ comply with the National Standards harmonized with the relevant European standards in terms of the assessment and verification of the constancy of performance of aggregates.
The Law of Ukraine “On the Provision of Construction Products on the Market” (No. 305-1) implements the requirements of EU Regulation No. 305/2011 and establishes a new system of mandatory rules for Ukrainian manufacturers of construction products.
The Law entered into force on January 1, 2023, and a transitional period is in effect until January 1, 2026, during which manufacturers must bring their activities into compliance with the new requirements.
• increased requirements for product safety and quality;
• mandatory factory production control (FPC — Factory Production Control);
• assessment and verification of the constancy of performance of products by a designated body;
• supervision and annual audits;
• issuance of declarations of performance.
The implementation of the Regulation is expected to increase the safety level of construction materials, ensure transparency and consumer confidence, and simplify the access of Ukrainian manufacturers to the EU market.
In 2025, KKNK “Technobud“ successfully passed the conformity assessment procedure within the framework of national legislation that adapts European standards and establishes mandatory requirements for construction products on the Ukrainian market.
The enterprise initiated the certification process in the summer of 2025 and significantly expanded the list of fractions in accordance with the harmonized national standards DSTU B EN. The certification covered dozens of fractions of sand, fine and coarse aggregates, fillers, ballast and hydraulic stone in accordance with the following standards: DSTU EN 13043:2019, DSTU B EN 13242:2013, DSTU B EN 12620:2013, DSTU EN 13450:2023, DSTU B EN 13139:2013, DSTU EN 13055-1:2019, DSTU EN 13383-1:2019.
Technobud Group has been operating in accordance with the requirements of EU Regulation 305/2011 on construction products since 2011.
The first Factory Production Control certificate was obtained on February 8, 2011 from the Instytut Mechanizacji Budownictwa i Górnictwa Skalnego (Warsaw, Poland).
In 2017 (March 15), the certification was renewed at Technický a zkušební ústav stavební Praha, s.p. (Czech Republic).
Every year, the Klesiv enterprise undergoes surveillance audits with the involvement of representatives of a notified body. The certificates confirm compliance with the following European standards: EN 12620:2002 — aggregates for concrete EN 13043:2002 — aggregates for bituminous mixtures, EN 13242:2002 — aggregates for mixtures with/without hydraulic binders, EN 13450:2002 — aggregates for railway ballast.
For the Ukrainian market, the enterprise holds valid certificates of conformity issued on September 16, 2016, in accordance with the following standards: DSTU B EN 12620:2013 — aggregates for concrete (valid until 02.05.2026); DSTU B EN 13043:2013 — aggregates for bituminous mixtures (valid until 02.05.2026).
Over more than 14 years of granite production, the company has initiated nearly one hundred tests in leading European accredited laboratories, including:
TZÚS Praha (Czech Republic), IMBiGS Warsaw (Poland), TPA Pruszków, CEBEL Lublin, Ferrocarbo Kraków, Drogmost Chełm, CTB Rzeszów, Instytut Badawczy Materiałów Budowlanych Białe Błota.
We are able to provide results of physical and chemical tests of aggregates, the accreditation for which is absent in most Ukrainian laboratories, including: MBF — dust quality; PSV — Polished Stone Value; MDE — resistance to wear; AS — acid-soluble sulfates; SE — sand equivalent; Ro — alkali–silica reaction.
